Back to Blog
How-to Guides 2026-11-14 Urth USA 0 views

How to Photograph the Sun Safely with the Solar ND100000 Filter Plus

How to Photograph the Sun Safely with the Solar ND100000 Filter Plus

A practical guide to solar photography with the Urth Solar ND100000 Filter Plus: setup, exposure starting points, and the safety checks that protect your eyes and sensor.

Why the Solar ND100000 Filter Plus is the starting point

Photographing the sun is not a normal bright-light problem. The sun delivers far more light than any camera can handle at normal shutter speeds and apertures, and unfiltered viewing through a lens can cause permanent eye damage. The Urth Solar ND100000 Filter Plus is built for this specific job: it provides a fixed 16.67-stop light reduction with an optical density of 5.0, and it blocks UV and IR light for safe solar and eclipse photography.

That fixed strength is the key decision. You cannot dial it back, so you frame and expose around a single very dark filter. The payoff is consistency: once you find a working exposure, it stays stable across the session.

What the filter gives you for solar work

  • Solar ND100000 Filter Plus: Fixed 16.67-stop light reduction with an optical density of 5.0 This is the exposure baseline. Every shutter speed and aperture you choose is built around this fixed reduction, not adjusted on the fly.
    Solar ND100000 Filter Plus
    Solar ND100000 Filter Plus
  • Solar ND100000 Filter Plus: Blocks UV and IR light for safe solar and eclipse photography Solar safety is not only about visible brightness. This is the supplied safety purpose of the filter.
  • Solar ND100000 Filter Plus: German SCHOTT B270 optical glass with CoraNano 20-layer dual-side nano-coating Optical purity and contrast matter when the subject is a small, high-contrast disk against a dark sky.
  • Solar ND100000 Filter Plus: Ultra-slim, warp-resistant aluminium frame prevents vignetting Less vignetting helps when the sun sits near the frame edge or when you stack the filter on a telephoto lens.

Solar photography filter setup, step by step

The order matters. Fit the filter before the lens sees the sun, and keep it fitted for the whole session.

  1. 1. Fit the filter to the lens first: Mount the Solar ND100000 Filter Plus on the front of your lens before pointing the camera anywhere near the sun. The available size in the supplied record is 82mm, so check your lens filter thread before you plan the shot.
  2. 2. Confirm the filter is seated and clean: A fully seated filter avoids stray light entering around the edge. Inspect the glass for dust or smudges before you start; the supplied record does not include a cleaning procedure, so follow the care guidance that came with your filter.
  3. 3. Set manual exposure and manual focus: Auto exposure will chase the sun and auto focus can hunt on a featureless disk. Start in manual mode with a low ISO, then adjust shutter speed and aperture around the fixed 16.67-stop reduction.
  4. 4. Frame with live view, not the optical viewfinder: Use the rear screen to compose and focus. This keeps your eye away from the optical path, which is the safer habit for solar work.
  5. 5. Shoot, review, and adjust in small increments: Take a test frame, check the histogram, and change one variable at a time. Because the filter strength is fixed, shutter speed and aperture are your only exposure controls.

ND100000 filter exposure settings: where to start

The filter supplies 16.67 stops of reduction, but the right shutter speed still depends on your ISO, aperture, and the sun's altitude. Treat these as starting points to test, not guaranteed values.

  • Keep ISO low: Start at your camera's base ISO. Raising ISO works against the filter's purpose and adds noise to a high-contrast subject.
  • Choose an aperture in the lens's sharp range: Stopping down slightly often improves sharpness on a telephoto lens. Avoid the widest and smallest apertures until you have a baseline frame.
  • Bracket shutter speed: Take a series at different shutter speeds and compare the histogram. The sun's disk should be bright but not clipped; detail in sunspots disappears first when you overexpose.
  • Recheck as the sun climbs: Atmospheric conditions and the sun's altitude change through the session. A working exposure at 9 a.m. may need a small adjustment by noon.

Using a solar ND filter with a telephoto lens

A telephoto lens gives you a larger solar disk, which makes sunspots and eclipse phases easier to see. The trade-off is that any vibration is magnified too. Use a sturdy tripod, and if your lens has a tripod collar, mount the camera by the collar rather than the body.

The filter's ultra-slim, warp-resistant aluminium frame is designed to prevent vignetting, which helps when the sun is not perfectly centered. Still, check the corners of your first frames; if you see darkening, recenter the sun before assuming the filter is at fault.

The supplied record lists an 82mm size. If your telephoto lens uses a different thread, the record does not confirm an adapter or step-up solution, so verify compatibility before the session rather than improvising in the field.

Safe sun photography tips that protect eyes and gear

Safety in solar photography is procedural, not just optical. These habits matter more than any single setting.

  • Never look through the optical viewfinder at the sun: Use live view for framing and focusing. This is the single most important habit in solar photography.
  • Keep the filter on for the entire session: Do not remove the Solar ND100000 Filter Plus to reframe or check focus. The supplied record describes it as blocking UV and IR light for safe solar photography, and that protection depends on it being fitted.
  • Do not improvise with stacked filters: The supplied information does not confirm that stacking other filters with the Solar ND100000 Filter Plus is safe or produces correct exposure. Use the filter as designed rather than combining it with unverified accessories.
  • Watch for heat and long sessions: The supplied record does not include a maximum continuous exposure time or heat limit. If you plan a long session, take breaks and monitor the lens and filter rather than assuming unlimited use.

Solar eclipse camera settings: planning the sequence

An eclipse compresses a lot of decisions into a short window. Because the filter strength is fixed, you cannot chase the changing light by rotating a ring. Instead, decide in advance how you will handle the partial phases and the brief period of totality.

During partial phases, the Solar ND100000 Filter Plus stays on and your exposure stays close to your tested baseline. The supplied record does not describe a specific procedure for removing the filter during totality, so plan that decision from your own eclipse plan and local guidance rather than treating this article as an eclipse protocol.

Practice the full sequence on an ordinary sunny day before the event. Rehearse filter fitting, live-view framing, and a short bracket of shutter speeds so that the mechanics are automatic when the window opens.

What the supplied information does not settle

The supplied record confirms the 82mm size and the filter's optical specifications, but it does not include a step-up adapter list, a cleaning procedure, or a maximum continuous exposure time. It also does not confirm compatibility with every lens thread or camera system. Check those details against your own gear before the session.

That is not a reason to avoid the filter; it is a reason to prepare. The Solar ND100000 Filter Plus is designed around a single, very specific job, and the more of your setup you settle in advance, the more of the eclipse or solar session you can spend shooting rather than troubleshooting.

Related Articles

Customer Service
Home
Products
Cart
Profile