Back to Blog
How-to Guides 2026-11-15 Urth USA 0 views

Fujifilm X100 Lens Hood Kit: Fitting and When to Use It

Fujifilm X100 Lens Hood Kit: Fitting and When to Use It

A practical guide to fitting the Fujifilm X100 (V/VI) Lens Hood Kit, using the adapter ring correctly, and knowing when a hood helps your street photography.

What the kit adds to your X100V or X100VI

The Fujifilm X100 (V/VI) Lens Hood Kit is a dedicated hood and adapter set for X100 series cameras. It shades the lens from stray light that can cause flare, and its slim alloy construction adds a layer of protection against knocks and the elements without making the camera noticeably heavier.

Because it is built for the X100 (V/VI), the adapter ring and hood are sized to sit close to the body and keep the camera portable. The kit includes the adapter and a hood cap, and it is available in black or silver to match your camera finish.

Kit details that affect how you fit it

  • Fujifilm X100 (V/VI) Lens Hood Kit: Dedicated X100 (V/VI) compatibility The adapter and hood are made for these bodies, so you are not guessing at a universal fit.
    Fujifilm X100 (V/VI) Lens Hood Kit
    Fujifilm X100 (V/VI) Lens Hood Kit
  • Fujifilm X100 (V/VI) Lens Hood Kit: Dual screw mount system for a perfectly aligned, secure fit The two screws let you align the hood precisely and lock it down, which matters for consistent shading.
  • Fujifilm X100 (V/VI) Lens Hood Kit: Compatible with threaded Urth 49mm fixed ND and UV filters If you already use those filters, you can plan the order of adapter, filter and hood before you start.
  • Fujifilm X100 (V/VI) Lens Hood Kit: Compatible with the original Fujifilm lens cap You can keep using the cap you already have when the hood is not in use.

Fitting the adapter ring and hood

The supplied information does not include a step-by-step installation sequence, so treat the following as a careful, general approach rather than a manufacturer procedure. Stop if anything feels forced.

  1. Prepare the camera: Turn the camera off and remove the original lens cap so the front of the lens is clear.
  2. Attach the adapter ring: Thread the adapter ring onto the front of the lens by hand. Keep it straight and do not force it; excessive force may damage threads or affect alignment.
  3. Seat the hood: Fit the hood onto the adapter and check that it sits evenly. The dual screw mount is designed to let you align the hood securely.
  4. Tighten the screws gently: Snug the adjustment screws just enough to hold the hood in place. Avoid over-tightening adjustment screws, which can stress the mount.
  5. Check alignment and clearance: Look through the viewfinder or screen to confirm the hood is not intruding into the frame, and make sure the hood cap fits as expected.

Using filters with the hood

The kit is compatible with threaded Urth 49mm fixed ND and UV filters, so you can combine shading with filtration. The supplied information does not specify the exact order for stacking a filter and the hood, so test the arrangement gently before relying on it outdoors.

Magnetic filters are not recommended with this kit. If your filter collection is magnetic, plan to use a threaded alternative when the hood is fitted.

When a hood helps street photography

  • Bright, low sun: A hood shades the front element from stray light that can wash out contrast or create flare in backlit street scenes.
  • Crowded pavements: The slim alloy hood adds a small buffer against accidental knocks without turning the X100 into a bulky setup.
  • Changing weather: The hood gives the front of the lens some protection from the elements, which is useful when you are moving between cover and open street.
  • When you want to stay inconspicuous: The kit is designed to preserve portability, so it suits the discreet, walk-around style the X100 is known for.

A simple care routine

Check the adjustment screws occasionally and keep them just snug rather than tight. When you remove the hood, unscrew the adapter by hand and avoid pulling at an angle, since excessive force may damage threads or affect alignment. Store the hood cap with the kit so it is ready when you need it.

The kit carries a lifetime warranty, but that does not replace careful handling: cross-threading or over-tightening can still cause damage that is not a manufacturing fault.

Related Articles

Customer Service
Home
Products
Cart
Profile